Arcam BDP100 User Manual download pdf (Page 4)

Zones

e following Zones are dened:

 0x01 – Zone 1.

Answer codes

e following answer codes are dened:

 0x00 – Status update.

 0x82 – Zone Invalid.

 0x83 – Command not recognised.

 0x84 – Parameter not recognised.

 0x85 – Command invalid at this time.

 0x86 – Invalid data length.

State changes as a result of other inputs

It is possible that the state of the BDP100/BDP300 may be changed as a result of user input via the front panel buttons or via the IR remote control.

Any change resulting from these inputs is relayed to the RC using the appropriate message type.

For example, if the user advanced to the next chapter using the

button on the front panel, a Title/Chapter status message (dened below) would be

sent to the RC. A similar action would be taken for all other state changes (including elapsed time).

Reserved Commands

Commands 0xF0 to 0xFF (inclusive) are reserved for test functions and should never be used.

Example command and response sequence

As an example, the command to simulate the RC5 command “25–53”, PLAY:

STR ZONE CC DL Data 1 Data 2 ETR

0x21 0x01 0x08 0x02 0x19 0x35 0x0D

Assuming that the command was accepted by the Blu-ray player and is being processed, the BDP100/BDP300 responds to this command with the

following sequence:

STR ZONE CC AC DL Data 1 Data 2 ETR

0x21 0x01 0x08 0x00 0x02 0x19 0x35 0x0D

1 2 3 4 5 6 7 8 9 10

No comments

Arcam BDP100 User Manual Page 4