Arcam DV27 Specifications download pdf (Page 8)

English

REMOTE TYPE

This informs the player which type of remote control you are using, so

that the player can take into account the slight differences between the

remote types. For ARCAM remote controls, the remote type is always

written on the front of the remote control, normally at the bottom of

the unit.

CR-314 This selects the grey ARCAM CR-314 remote

control

CR-80 This selects the black ARCAM CR-80 learning

remote control

CR-9000 This selects the black ARCAM CR-9000 learning

remote control

Other A non-ARCAM learning remote control is being

used

It is important to choose ‘Other’ if the learning remote in use does not

support RC-5 ‘toggle bits’.

OSD (ON SCREEN DISPLAY)

This setting controls the ‘pop up’ messages that appear on screen.

On Pop-up messages are enabled

Off No pop-up messages, only menus when required.

Certain messages, such as ‘No Disc’ are always shown regardless of

how this is set.

PRIORITY

This item is not applicable for the DV27, and should not be changed.

VIDEO SETUP

Video 2/4

TV Shape 4:3 Letterbox

TV System Auto

Progressive Not Applicable

HQ Video RGB Scart

NTSC Black 7.5 IRE(Standard)

TV SHAPE

This needs to be set correctly for the type of TV you have and the type

of display you prefer.

4:3 Letterbox Use this setting if you have a conventional 4:3 TV,

and you prefer to view wide screen movies in

letterbox format (with black bars at the top and

bottom)

4:3 Panscan Use this setting if you have a conventional 4:3

TV, and you prefer to view wide screen movies

in Pan & Scan format (cropping the sides of the

image)

16:9 Use this setting if you have a wide screen (16:9)

TV. Material in 16:9 format is displayed so as to fill

the screen.

If you have a 4:3 TV and you have set a preference for Panscan, it does

not mean you will always see movies in this format, since the Panscan

display must be supported on that disc.

TV SYSTEM

This is set at the factory to be appropriate for the type of TV used in

your country. Should you need to change this setting, the options are

explained below.

Auto The video output is taken from that recorded on

the disc. When no disc is playing, the logo screen

is displayed using the standard of the last disc

played.

NTSC NTSC is always used as the video standard. Note

that PAL discs are converted to NTSC, but this

causes some reduction in the quality of the video

output (and may cause the video to become

‘jerky’). This is the best setting to use if your TV

can accept only NTSC video (this is generally

the case in North America); better results are

obtained by using ‘Auto’, but your TV must be

able to support PAL.

PAL PAL is always used as the video standard. Note

that NTSC discs are converted to PAL, but this

causes some reduction in the quality of the video

output (and may cause the video to become

‘jerky’). Better results will be obtained by using

‘Auto’, but your TV must be able to support

NTSC.

PROGRESSIVE

This item is not applicable to the DV27 and should not be changed.

HQ VIDEO (HIGH QUALITY VIDEO)

This setting controls the type of video given out on the Component

and SCART video outputs. It is set at the factory to be appropriate for

the type of TV used in your country, so it is best not to change it. If it

gets set incorrectly then the picture shown on the TV will have strange

colouring.

Component The video output on both the Component video

(3 phonos) and SCART is Y, Pb, Pr component

video.

RGB SCART The video output on both the Component video

(3 phonos) and SCART is RGB. Note that if you

are using RGB output via phono connectors, you

will also need to use COMPOSITE as a sync signal.

NTSC BLACK (PEDESTAL)

This setting controls the ‘pedestal’ signal or black level when the NTSC

video standard is used. Note that it does not affect PAL video in any

way.

0 IRE This removes the pedestal from NTSC video. This

setting should be used in Japan, and also if you are

using RGB video, whatever the country.

7.5 IRE This is the standard pedestal level that should be

used in all countries that use NTSC video, with

the exception of Japan.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Comments to this Manuals

No comments

Arcam DV27 Specifications Page 8

Comments to this Manuals

Related products and manuals for DVD players Arcam DV27