Arcam A60 User Manual download pdf (Page 13)

Auxiliary

Nominal output level as Tape output

Output Impedance 15ki2

Pre-amplifier (A60AP+ only)

Nominal output level 600mV

Maximum output before clipping 1.8V rms

Noise < -80dB

Distortion at nominal output level < 0.03% 20Hz-20kHz

Output Impedance 5000

Headphones

Nominal output level (no load) 6.5V rms

Output Impedance 1300

Suitable for headphones of 80 - 2kO impedance

Loudspeakers

Nominal output level 35 watts into 80 at IkHz

Low frequency damping factor >50

Performance

Power output & distortion

Both channels into 80; > 40W at 0.2% THD 20Hz - 20kHz.

IkHz output at 0.2% THD with one channel driven is typically:

50W into 80

70W into 40

IHF burst power into 80 typically 60W (40 typically 90W).

IkHz THD < 0.08% at any level up to 35W/80, typically < 0.03% at 35W.

Frequency response

Disc see input facilities

Other Inputs 20Hz - 20kHz + 0.5 - IdB reference IkHz, output falls continuously beyond

these limits.

Crosstalk

< —65dB at IkHz.

Protection

Short term: delayed V-I electronic protection

Long term: 1.6A 20mm x 5mm quick-blow fuses.

Power supply

Maximum Load 120VA

Mains Voltage 240V nominal, range 190 - 255 volts. May be dealer adjusted to 120V

nominal, range 95 - 128 volts, or 220V nominal, rangé 175 - 235 volts.

Operation at below the nominal mains voltage will produce a corresponding reduction in the

maximum output power.

Dimensions

Width: 450mm (17%in)

Depth: 250mm (9%in)

Height: 60mm (2%in)

Weights

A604- and A60AP+

Net 4.1Kg (9.01b)

Packed 4.8Kg (10.61b)

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Arcam A60 User Manual Page 13

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Arcam A60