Arcam AVP700 User Manual Page 40
- Page / 43
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
AVP700
E-40
AVP700
E-41
English
Direct mode / Mode Direct / Direktmodus / Modus Direct
g
Change the stand-by state of a zone.
f
Modiez l’état de veille d’une zone.
d
Ändern des Stand-by-Zustands einer Zone.
n
De standby-status van een zone wijzigen.
Example / Exemple / Beispiel / Voorbeeld
g
Command/response sequence to switch ‘Direct mode’ on:
f
Séquence commande/réponse pour activer le mode Direct :
d
Befehls-/Rückmeldesequenz zur Aktivierung des Direktmodus:
n
Opdracht- en responsreeks om modus Direct in te schakelen:
<
Com.: PC_311 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
<
Resp.: AV_3P11 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
Decode mode — two-channel /
Mode de décodage – deux canaux /
Dekodiermodus – Zweikanal /
Decoderingsmodus – tweekanaals
g
Set the decode mode for two-channel material.
f
Réglez le mode de décodage pour le matériau à double canal.
d
Einstellen des Dekodiermodus auf Zweikanalmaterial.
n
De decoderingsmodus voor tweekanaals materiaal instellen.
Example / Exemple / Beispiel / Voorbeeld
g
Command/response sequence to change the decode mode to Pro Logic IIx
Movie Mode:
f
Séquence commande/réponse pour remplacer le mode de décodage par le
mode Pro Logic IIx Movie :
d
Befehls-/Rückmeldesequenz zur Änderung des Dekodiermodus in den Modus
„Pro Logic IIx Movie“:
n
Opdracht- en responsreeks om de decoderingsmodus te wijzigen naar de
modus Pro Logic IIx Movie:
<
Com.: PC_413 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
<
Resp.: AV_4P13 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
Decode mode — multi-channel /
Mode de décodage – multicanal /
Dekodiermodus – Mehrkanal /
Decoderingsmodus – meerkanaals
g
Set the decode mode for multi-channel material.
f
Réglez le mode de décodage pour le matériau multicanal.
d
Einstellen des Dekodiermodus auf Mehrkanalmaterial.
n
De decoderingsmodus voor meerkanaals materiaal instellen.
Example / Exemple / Beispiel / Voorbeeld
g
Command/response sequence to change the decode mode to Pro Logic IIx
Movie Mode:
f
Séquence commande/réponse pour remplacer le mode de décodage par le
mode Pro Logic IIx Movie :
d
Befehls-/Rückmeldesequenz zur Änderung des Dekodiermodus in den Modus
„Pro Logic IIx Movie“:
n
Opdracht- en responsreeks om de decoderingsmodus te wijzigen naar de
modus Pro Logic IIx Movie:
<
Com.: PC_512 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
<
Resp.: AV_5P13 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
COMMAND:
Byte: Description:
CC ‘3’ (0x33) (Command code)
P1 ‘1’ (0x31) – Zone 1
P2 Request:
‘0’ (0x30) – Set ‘Direct Mode’ off
‘1’ (0x31) – Set ‘Direct Mode’ on
‘9’ (0x39) – Request mode setting
RESPONSE:
Byte: Description:
RC ‘3’ (0x33) (Reply Code)
AC Answer code
P1 ‘1’ (0x31) – Zone 1
P2 Response:
‘0’ (0x30) – ‘Direct mode’ is off
‘1’ (0x31) – ‘Direct mode’ is on
COMMAND:
Byte: Description:
CC ‘4’ (0x34) (Command code)
P1 ‘1’ (0x31) – Zone 1
P2 ‘.’ (0x2e) – Mono
‘/’ (0x2f) – Stereo
‘0’ (0x30) – Pro Logic II Movie Mode
‘1’ (0x31) – Pro Logic II Music Mode
‘3’ (0x33) – Pro Logic IIx Movie Mode
‘4’ (0x34) – Pro Logic IIx Music Mode
‘6’ (0x36) – Dolby Pro Logic Emulation
‘7’ (0x37) – Neo:6 Cinema
‘8’ (0x38) – Neo:6 Music
‘9’ (0x39) – Request decode mode
RESPONSE:
Byte: Description:
RC ‘4’ (0x34) (Reply Code)
AC Answer code
P1 ‘1’ (0x31) – Zone 1
P2 Response:
The current decode mode is returned,
as for the command.
COMMAND:
Byte: Description:
CC ‘5’ (0x35) (Command code)
P1 ‘1’ (0x31) – Zone 1
P2 ‘.’ (0x2e) – Mono down-mix
‘/’ (0x2f) – Stereo down-mix
‘0’ (0x30) – Multi-channel mode
‘1’ (0x31) – Dolby EX mode
‘2’ (0x32) – Pro Logic IIx movie mode
‘3’ (0x33) – Pro Logic IIx music mode
‘9’ (0x39) – Request decode mode
RESPONSE:
Byte: Description:
RC ‘5’ (0x35) (Reply Code)
AC Answer code
P1 ‘1’ (0x31) – Zone 1
P2 Response:
The current decode mode is returned,
as for the command.
- Français 1
- Nederland 1
- Safety guidelines 2
- Contents 3
- Before you start! 4
- Before making connections 5
- Zone 2 explained 5
- Installation 6
- FR FL CEN RS LS RSB LSB SUB 7
- 9
- Con guring the AVP700 11
- The ‘Basic’ Set-up Menus 12
- 2 – Speaker Sizes 13
- 3 – Sub woofer Settings 13
- 4 – Speaker Delay Settings 14
- 5 – Level settings 15
- 6 – EX Settings 15
- The ‘Advanced’ Set-up Menus 16
- ADV 4 – Zone 2 Settings 17
- ADV 5 – Analogue Settings 17
- ADV 6 – HDMI Settings 17
- Remote control 18
- Operating your AVP700 19
- Input selection 20
- Stereo Direct 20
- Headphones 20
- Tuning to a station 22
- Storing a preset 22
- Deleting a preset 22
- RDS: Radio Data System 22
- FM Mute/Mono 22
- Main Menu Screen 1 23
- Main Menu Screen 2 24
- Main Menu Screen 3 24
- Surround modes 25
- Two-channel source modes 26
- Multi-channel source modes 26
- Speaker positioning 27
- Troubleshooting 28
- IR Remote Codes 30
- SCART connections 32
- Technical specications 33
- Guarantee 34
- Introduction 35
- Command and response formats 35
Related products and manuals for AV receivers Arcam AVP700
(68 pages)
(44 pages)© 2020, manymanuals.com. All rights reserved. | 0.863 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals