Arcam SOLO MINI Operations Instructions download pdf (Page 5)

solo

mini

English

SOURCE

Power

Note that the primary power-switch for Solo Mini is on the rear of the unit. If the

power light is not illuminated at all, check that the unit is receiving mains power and the

rear power switch is ‘On’.

Press the

button to switch Solo Mini between ‘On mode’ and ‘Standby mode’.

When Solo Mini is in standby mode, the light next to the power button on the top panel

glows red. Pressing

when the unit is in standby mode will cause the unit to switch on

and the power button light turns blue.

Source

Press the

SOURCE button to cycle

through the available signal sources.

In Standby mode, pressing the

SOURCE button switches Solo Mini on.

(Stop/Eject)

Press the

button once to stop a disc

playing. Press again to eject a stopped disc.

When playing a CD, pressing and holding

also ejects a disc.

Headphone output

This 3.5mm stereo jack socket

accepts headphones with an

impedance between 32Ω and

600Ω. Sound to the speakers

is muted when headphones

are used.

Line-level input

This is a stereo analogue

input, connected via a stereo

3.5mm jack plug. It is suitable

for audio sources such as

a portable tape player, MP3

player or games console.

USB input

The USB socket is suitable for an MP3

player or for playing les contained on

a USB memory device.

Play/Pause

Press the

;

button to start playing a

track, pause a playing track, or resume

playing a paused track.

Skip back/forward

To skip tracks on a CD, press

. When

skipping back, the rst button press takes

you to the beginning of the current track.

Pressing the button again takes you to the

start of the previous track.

When the source is Radio (DAB, FM or

AM), the buttons cycle through station

presets.

When the System menu is active, the

buttons are also used to step through

option settings (see page 16).

Mute

Use this button to mute the volume. If Solo Mini is

muted, pressing the MUTE button for a second time

or changing the volume will unmute it.

Volume –/+

Use these buttons to decrease (–) or

increase (+) the volume. The current

volume setting is shown on the front

panel display.

Front panel display

This is a vacuum uorescent

display with variable brightness.

  

  

CD input slot

Gently insert a CD (label-side up) into

this slot and allow the disc to be drawn

in by motorised rollers. If ‘CD AutoPlay’

is enabled, the CD plays immediately (see

page 16.)

Do not nsert 80 mm mini CDs or any non-

stanDarD sizeD DisCs.

top panel/

front panel

1 2 3 4 5 6 7 8 9 10 ... 17 18

Comments to this Manuals

No comments

Arcam SOLO MINI Operations Instructions Page 5

Comments to this Manuals