Arcam FMJ AV9 User Manual download pdf (Page 18)

AV9

E-18

English

AV9

E-19

ADV 5 – Input trims

Input trims: Allows the adjustment of the input sensitivity of the analogue inputs (in

Volts RMS) so that each one achieves the optimum dynamic range and sounds similar

in loudness to the others.

Available level settings are: Low 1V, Reference 2V, Medium 4V, High 8V. The

reference level of 2V should be appropriate for most inputs.

To ensure the correct level is set up,  rst ensure that all source levels are set to

Reference 2V. Find some loud music or use a 0dB reference signal from each source.

If the source activates the ‘Analogue CLIP’ indication at the bottom of the screen, then

adjust its level upwards to 4V or 8V, until the ‘Analogue CLIP’ indicator is no longer

there. Then repeat the adjustment process with every other input, selecting the lowest

voltage setting that does not activate the ‘Analogue CLIP’ indicator. If in doubt or a loud

signal is not available, then leave a source on the 2V setting. If you have a CD player

with built-in HDCD decoding, you should generally use the 4V setting.

If a source is very quiet compared with the other sources you can increase its loudness by selecting the

Low 1V setting. Once set, we suggest you play some loud music from this source to check the ‘Analogue

CLIP’ indicator does not come on.

Notes:

The ‘Analogue CLIP’ detector is only active in the ‘Input Trims’ menu, and only responds to the

input indicated by the highlight bar on the screen.

When the Aux input is converted into a Phono (turntable) input, the sensitivity adjustment is still

available.

The ‘Input Trims’ control is only available for analogue inputs. Whenever a digital input is

selected, this control is overridden.

ADV 6 - Input name

The input name displayed for each input can be changed to something different, up

to a maximum of 13 characters. For example, if you are feeding signals from a games

console into the AUX input, then you may wish to change the display name of this input

to ‘console’.

On entering the menu, all possible sources are displayed on the screen. To rename an

input, move the screen highlight to the input name that you wish to change; you are

prompted to ‘Press OK to edit name’. Pressing OK on the remote control or front panel

causes a  ashing cursor to appear on the  rst letter of the input name.

Use the Up/Down controls to change the character in the position indicated by the

cursor; use the Left/Right controls to move the cursor position along the input name.

When you have  nished entering the name you require, press OK for a second time.

If, at any time, you wish to abort changing the input name, pressing the MENU button

returns the name of the selected input to its last saved setting.

Note that the input names are not stored as part of the presets (see below). Therefore, if the input

names are changed, these names apply irrespective of the preset in use.

Adv 6 - Input Name

Aux: Phono/Aux

DVD: DVD

Sat: Sat

AV: AV

VCR: VCR

Tape: Tape

CD: CD

Tuner: Tuner

DVD-A: Multichannel

Adv 5 - Input Trims

Aux: Reference 2V

DVD: Reference 2V

Sat: Reference 2V

AV: Reference 2V

VCR: Reference 2V

Tape: Reference 2V

CD: Reference 2V

Tuner: Reference 2V

DVD-A: Reference 2V

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 53 54

Comments to this Manuals

No comments

Arcam FMJ AV9 User Manual Page 18

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Arcam FMJ AV9