Arcam FMJ AV9 User Manual download pdf (Page 36)

AV9

E-36

English

AV9

E-37

Technical specications

NOTE: All specication values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specications

are subject to change without notice.

Audio

Line input sensitivity (set to Reference) 2V rms

Input impedance 10kΩ

Preamp output level (nominal) 2V rms

Output impedance 25Ω

Signal/noise ratio (unwtd 20Hz–20kHz) – analogue >100dB

Signal/noise ratio (unwtd 20Hz–20kHz) – digital (24-bit) >98dB

THD+N – analogue 0.0012%

THD+N – digital (24-bit) 0.0015%

Headphone maximum output level into 600Ω 5V p-p

Output impedance 5Ω

Video inputs and outputs

Input and output impedance 75Ω

Composite video level 1V

HF response to (–3dB) 12MHz

S-video level (Y/C) 1V / 0.28V

HF response to (–3dB) 12MHz

HQ (component) video

level (Y / Cr / Cb) 1V / 0.5V / 0.5V

level (R / G / B) 1V / 1V / 1V

HF response to (–3dB) 300MHz

Digital inputs

Coaxial connection (level/impedance) 0.5V/75Ω

Acceptable sampling frequencies, all inputs 44.1kHz, 48kHz,

(and 96kHz stereo only)

Digital output

Output level/impedance 0.5V/75Ω

Sampling frequency in ADC output mode 44.1kHz

Trigger outputs

Output D.C. voltage (excl. RGB status) 12V ±1V

Allowable load 30mA max (min 400Ω)

Remote inputs and output

Signal modulated 36kHz carrier

Coding Philips RC-5

General

Mains voltage range 85V to 265V

Power consumption 35VA

Power consumption (standby) 32VA

Dimensions Width x Depth x Height (including feet) 433mm x 360mm x 130mm

Weight (net) 9kg

Weight (packed) 14kg

Supplied accessories Mains lead,

CR80 remote control, 2 x AA

batteries

E&OE

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

Comments to this Manuals

No comments

Arcam FMJ AV9 User Manual Page 36

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Arcam FMJ AV9