Arcam SOLO MOVIE 2.1 Operations Instructions download pdf (Page 2)

E-2

Important safety instructions

This product is designed and manufactured to meet

strict quality and safety standards. However, you should

be aware of the following installation and operation

precautions.

1. Take heed of warnings and instructions

You should read all the safety and operating instructions

before operating this appliance. Retain this handbook

for future reference and adhere to all warnings in the

handbook or on the appliance.

2. Water and moisture

The presence of electricity near water can be dangerous.

Do not use the appliance near water – for example next

to a bathtub, washbowl, kitchen sink, in a wet basement

or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not

spilled into the enclosure through any openings. Liquid-

ﬁlled objects such as vases should not be placed on the

equipment.

4. Ventilation

Do not place the equipment on a bed, sofa, rug or similar

soft surface, or in an enclosed bookcase or cabinet, since

ventilation may be impeded. We recommend a minimum

distance of 50mm around the sides and top of the

appliance to provide adequate ventilation.

5. Heat

Locate the appliance away from naked ﬂames or heat

producing equipment such as radiators, stoves or other

appliances (including other ampliﬁers) that produce heat.

6. Climate

The appliance has been designed for use in moderate

climates.

7. Racks and stands

Only use a rack or stand that is recommended for use

with audio equipment. If the equipment is on a portable

rack it should be moved with great care, to avoid

overturning the combination.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft,

damp, lint-free cloth. Do not use paint thinners or other

chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or

polishes as they can cause indelible white marks if the

unit is subsequently wiped with a damp cloth.

9. Power sources

Only connect the appliance to a power supply of the

type described in the operating instructions or as marked

on the appliance.

The primary method of isolating Solo Movie 2.1 from the

mains supply is to use the switch on the rear of the unit.

Solo Movie 2.1 must be installed in a manner that makes

disconnection possible.

10. Power-cord protection

Power supply cords should be routed so that they are

not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to

cords and plugs, and the point where they exit from the

appliance.

11. Power lines

Locate any outdoor antenna/aerial away from power

lines.

12. Non-use periods

If the unit has a stand-by function, a small amount of

current will continue to ﬂow into the equipment in this

mode. Unplug the power cord of the appliance from the

outlet if left unused for a long period of time.

13. Abnormal smell

If an abnormal smell or smoke is detected from the

appliance, turn the power off immediately and unplug

the unit from the wall outlet. Contact your dealer

immediately.

14. Servicing

You should not attempt to service the appliance

beyond that which is described in this handbook. All

other servicing should be referred to qualiﬁed service

personnel.

15. Damage requiring service

The appliance should be serviced by qualiﬁed service

personnel when:

A. the power-supply cord or the plug has been

damaged, or

B. objects have fallen, or liquid has spilled into the

appliance, or

C. the appliance has been exposed to rain, or

D. the appliance does not appear to operate normally

or exhibits a marked change in performance, or

E. the appliance has been dropped or the enclosure

damaged.

Safety compliance

This product has been designed to meet the IEC 60065

international electrical safety standard.

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified

service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the

plug fully into the socket.

safety

guidelines